Variable Speed Water Pressure Booster

PowerTank Bunded pumping range is designed for commercial use where there are low mains water pressure and where pressure fluctuates.  Every Powertank Bunded unit benefits from a ‘tank within a tank’ bunded construction, with the outer tank able to maintain a minimum of 110% of the volume of the inner tank.  The inner tank acts as the primary storage container, whilst the outer tank acts as a fail-safe in the event of a spill.  It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed.  The Bunded range is designed for areas where the floor space is not restricted.

Key Features:

– Non-corrosive holding tank (WRAS-approved material)
– Pre-fitted WRAS-approved fill valve
– Minimal installation requirement
– Built-in electronic start/stop
– Dry run protection with auto restart (time delay)
– AF Air gap
– Suitable for up to Fluid Category 4

System Connections:

Inlet: ½” BSP
Outlet: 1” BSP
Overflow: 1 1/4” BSP
Drain Off: 1” BSP

If there are any special Inlet or Overflow requirements please let us know prior to placing an order. 

Technical Info:
Power Supply: 240V, 50Hz
Controller: Steadypres M/T 07 c/w 8ltr pressure vessel
Mains Power Cable: 2m x 1mm ² 3 core fitted with 5 amp fuse mains plug
Current Input: 4.5 amp
Tank Weight Empty: 250ltr = 55kg 650ltr = 100kg
Tank Weight Full 1ltr = 1 kg plus the weight of an empty tank
Access Cover Diameter: Internal 190mm, External 285mm

The Powertank will produce

80 litres per min @ 3 Bar

NOTE: A minimum of 0.5 bar incoming pressure is required for our Standard Fill Valve

You want:

* Water on demand
* More pressure and flow from your shower
* Good flow of pressure to multiple water outlets
* Fully Automatic Operation
* Low Maintenance
* Easy Fit and Commission
* Very Quiet compared to other Systems

BENEFITS of the Powertank Range of Water Pressure boosters:

Water on Demand
Good Pressure & Flow to all Outlets*
Low Maintenance
Very Quiet Operation
Energy Saving Options
Installer Friendly Design
Fully Automatic Operation
Built-in Pump Protection